Alliance Gator Wet Look and Natural Look NF Paver Sealers

By Josh Kaplan

Updated: November 14, 2026

Alliance Gator’s Wet Look Sealer and Natural Look NF both list unsealed dry-cast concrete pavers among their intended surfaces. Each product has its own application directions. Here is what Alliance Gator specifies for these two sealers on that type of driveway.

Wet Look Sealer for unsealed dry-cast concrete pavers

Alliance Gator’s Wet Look Sealer directions specify unsealed surfaces only and exclude use as a resealer. Its directions call for removing stains and cleaning the pavers before application. The pavers and joint sand must be dry. Alliance Gator specifies an application temperature of 60–85°F and directs users to wait 24 hours before using the sealed area.

Natural Look NF for unsealed dry-cast concrete pavers

Alliance Gator’s Natural Look NF directions also specify unsealed surfaces only and exclude use as a resealer. For this product, the instructions specify an application temperature of 41–85°F and a dry surface. The manufacturer calls for one coat and cautions that more coats can make the surface slippery.

Alliance Gator specifies a 24-hour wait after applying Natural Look NF before reopening the surface to both pedestrian and vehicle traffic.

Interlocking concrete paver driveway. Photo by Pacificoutdoorliving, Wikimedia Commons, CC BY-SA 3.0.

Published by Groutastic.